Back to Top

1
Hi, Guest!
  • RELAY
  • Phonix Contact Safety Relay PSR-ESL4_ B

Phonix Contact Safety Relay PSR-ESL4_ B

Update Terakhir
:
01 / 12 / 2019
Min. Pembelian
:
0 Unit
Harga
CALL
Pt. Anela Electrindo Nusantara
 
Merupakan perusahaan yang berkonsentrasi dalam bidang electrikal, baik untuk penyediaan material part maupun untuk sarvice, maintenance dan perencanaan electrician untuk industri building dan lain lain. Sesuai dengan moto perusahaan kamu "WE ARE SOLUTION FOR ELECTRICAL"
Kami hadir sebagai perusahaan

Detail Phonix Contact Safety Relay PSR-ESL4_ B

1. Short Description The PSR-… -24DC/ ESL4/ 3X1/ 1X2/ B safety relay can be used in safety circuits according to DIN EN 60204-1/ VDE 0113 Part 1. Depending on the external circuit, up to Safety Category 4 can be achieved. One or two-channel control is available with manual or automatic activation. Depending on the controller board, a reset button is monitored. The relay has three enable current paths and one signaling current path. The contacts drop without delay according to Stop Category 0 ( DIN EN 60204-1/ VDE 0113 Part 1) . If an auxiliary supply of 24 V AC/ DC is supplied at A1 and A2, the Power LED lights up. The safety relay is prepared by connecting terminal points S11/ S12 and S11/ S22. The module starts when terminal blocks S33/ S34 or S33/ S35 are jumpered. Contacts 13/ 14, 23/ 24, and 33/ 34 close and contact 41/ 42 opens. LEDs " K1" and " K2" light up. External contactors or contact expansions with positively driven contacts are monitored in the S33/ S34 or S33/ S35 circuit by looping the corresponding Form B contact.
Tampilkan Lebih Banyak
pt. aneka electrindo nusantara
pt. aneka electrindo nusantara

PT. ANEKA ELECTRINDO NUSANTARA

Anggota PREMIUM 13 Tahun
Komplek dosen IKIP Blok 2. No.43,Jati BeningEmail : marketing@aen.co.id, Bekasi
Indonesia Komplek dosen IKIP Blok 2. No.43,Jati BeningEmail : marketing@aen.co.id
Bekasi
-
Hubungi Kami

Detail Phonix Contact Safety Relay PSR-ESL4_ B

1. Short Description The PSR-… -24DC/ ESL4/ 3X1/ 1X2/ B safety relay can be used in safety circuits according to DIN EN 60204-1/ VDE 0113 Part 1. Depending on the external circuit, up to Safety Category 4 can be achieved. One or two-channel control is available with manual or automatic activation. Depending on the controller board, a reset button is monitored. The relay has three enable current paths and one signaling current path. The contacts drop without delay according to Stop Category 0 ( DIN EN 60204-1/ VDE 0113 Part 1) . If an auxiliary supply of 24 V AC/ DC is supplied at A1 and A2, the Power LED lights up. The safety relay is prepared by connecting terminal points S11/ S12 and S11/ S22. The module starts when terminal blocks S33/ S34 or S33/ S35 are jumpered. Contacts 13/ 14, 23/ 24, and 33/ 34 close and contact 41/ 42 opens. LEDs " K1" and " K2" light up. External contactors or contact expansions with positively driven contacts are monitored in the S33/ S34 or S33/ S35 circuit by looping the corresponding Form B contact.
Tampilkan Lebih Banyak
Kontak Kami