Back to Top

1
Hi, Guest!

Fuji Fault Indicator ZK Type

Update Terakhir
:
01 / 12 / 2019
Min. Pembelian
:
1 Karton
Harga
CALL
Pt. Anela Electrindo Nusantara
 
Merupakan perusahaan yang berkonsentrasi dalam bidang electrikal, baik untuk penyediaan material part maupun untuk sarvice, maintenance dan perencanaan electrician untuk industri building dan lain lain. Sesuai dengan moto perusahaan kamu "WE ARE SOLUTION FOR ELECTRICAL"
Kami hadir sebagai perusahaan

Detail Fuji Fault Indicator ZK Type

1.The panel back size is shorter than TK type by about 25% . 2. Faston / Tab type and Screw type are available as standard line up. Screw type is equiped with a terminal cover. Vertical and horizontal jumper for link reduce wires. Short time input operation is available for current type. ( operating at 200% or more of rated current, at input pulse of 10 msec) . It sensitively responds to an pulse input signal to the annunciator relay. For further details, refer to technical information ( page E62) . 4 cotacts can be choosed from 2 contacts linked with the display flag and 3 contacts linked with the coil voltage. Wide contact variations enable to omit some auxiliary relays now in use. The approximately 40% expansion of the name character area enhances visibility of a nameplate.
Tampilkan Lebih Banyak
pt. aneka electrindo nusantara
pt. aneka electrindo nusantara

PT. ANEKA ELECTRINDO NUSANTARA

Anggota PREMIUM 13 Tahun
Komplek dosen IKIP Blok 2. No.43,Jati BeningEmail : marketing@aen.co.id, Bekasi
Indonesia Komplek dosen IKIP Blok 2. No.43,Jati BeningEmail : marketing@aen.co.id
Bekasi
-
Hubungi Kami

Detail Fuji Fault Indicator ZK Type

1.The panel back size is shorter than TK type by about 25% . 2. Faston / Tab type and Screw type are available as standard line up. Screw type is equiped with a terminal cover. Vertical and horizontal jumper for link reduce wires. Short time input operation is available for current type. ( operating at 200% or more of rated current, at input pulse of 10 msec) . It sensitively responds to an pulse input signal to the annunciator relay. For further details, refer to technical information ( page E62) . 4 cotacts can be choosed from 2 contacts linked with the display flag and 3 contacts linked with the coil voltage. Wide contact variations enable to omit some auxiliary relays now in use. The approximately 40% expansion of the name character area enhances visibility of a nameplate.
Tampilkan Lebih Banyak
Kontak Kami